How To Install Attic Door Ladder
Return to How To's & Project Ideas
How to Install an Attic Ladder
Print this commodity
An easily attainable attic provides valuable actress storage space, especially for seasonal items like Christmas decorations or deck chairs. Please note: this task volition require the help of a second person in places.
The easiest location to install an attic ladder is the cranium hatch. Clear any pipes, cables and other obstructions out of the way to give you lot room to piece of work and prevent accidents. The attic ladder will occupy a larger space than the original attic hatch. Ensure the new attic ladder can be installed without the removal of any weight supporting joists or beams. Lay down a protective floor covering and make sure to wear protective eyewear and gloves where appropriate.
Using a hammer, a chisel and a nail bar, advisedly prise off the architrave effectually the attic latch opening.
Pace 3
Marking Position of Cranium Ladder
Measure out and so pencil the outline of the attic ladder mounting frame in position on the ceiling.
Carefully cut forth the outline using a hand saw, as accurately as possible. Exist conscientious of falling debris and make certain to wear safety goggles.
Step 5
Get together Attic Door Environment
Assemble the cranium ladder'south surround that will hold its mounting frame in place. There should be a 1cm gap all effectually betwixt the frame and the frame of the attic ladder.
Step 6
Secure Attic Door Environment
Drill screws into the environs to ensure it is solidly secured.
Footstep seven
Position Attic Door
At this point you will need a 2d person to help you position the entire attic ladder mechanism through the opening into the attic space. With i person in the attic and one person under the opening, insert the attic ladder into place, ensuring that the door is flush with the ceiling. Drill two batons beyond the lesser of the opening; the attic door and frame will rest on these batons every bit the frame is attached to the surround. The person in the attic can now screw the supporting frame to the attic ladder frame. Afterward the attic door is secured into place the 2d person can unscrew the batons from below and open the attic door.
Step eight
Stabilise Attic Door Frame
The gap around the attic door frame can at present be packed with timbers to stabilise the door frame.
Step 9
Secure Attic Door Frame
Screw through the frame and the packing timbers into the surround using heavyweight screws.
Footstep 10
Conform Ladder Length
When the cranium ladder is fully secured in place, the ladder must now be trimmed to the right length. Unfold the middle section of the ladder and measure from the finish of this ladder to the ground using a long level, or straight piece of timber to back up the measuring record to ensure the correct angle and measurement. Information technology is of import to ensure that the ladder is exactly the right length. The weight of someone climbing the ladder is taken past the feet of the ladder resting firmly on the ground and not by the supporting frame. Trim the bottom of the ladder with a mitt saw so that it is the perfect length.
Step 11
Adhere Decorative Architrave
Cut the architrave timber to length and nail into identify. This will cover the unsightly gaps and provide a clean and professional stop.
Source: https://www.topline.ie/blog/how-to-guides/how-to-install-an-attic-ladder
Posted by: mcghiesant1952.blogspot.com
0 Response to "How To Install Attic Door Ladder"
Post a Comment